Search results for "Lap joint"
showing 10 items of 36 documents
Surface and mechanical characterization of stationary shoulder friction stir welded lap joints: experimental and numerical approach
2020
Friction Stir Welding (FSW) is one of the most used solid-state welding processes in the aeronautical, aerospace, ground transportation and naval fields. Stationary Shoulder Friction Stir Welding (SSFSW) is a recently introduced variant of the process allowing lower heat input into the joints, with beneficial effects in terms of joint mechanical properties, microstructure and top surface finish. In the paper, lap joints produced by SSFSW and made out of AA6082-T6 aluminum alloy sheets have been analyzed with the aim to investigate the effect of the stationary shoulder on the lap joints surface, metallurgical, and mechanical properties. The lap joints produced by SSFSW have been compared to …
Enhancement of mechanical properties of FSWed AA7075 lap joints through in-situ fabrication of MMC
2017
Abstract Friction Stir Processing (FSP) has been demonstrated feasible to create local Metal Matrix Composites (MMCs) in light alloys matrix. In this research, local MMCs were produced contextually to the weld using Friction Stir Welding (FSW). SiC particles were added to AA7075 lap joints by creating a proper groove on the top surface of the bottom sheet. Different welds were produced with increasing number of tool passes. The effect of the multiple passes was investigated through shear tests, macro and micro observations, average grain size and microhardness measurements. The welded joints were compared to a reference weld produced with no reinforcements. It was found that poor mixing bet…
Dissimilar titanium/aluminum friction stir welding lap joints by experiments and numerical simulation
2016
Dissimilar lap joints were produced by friction stir welding (FSW) out of Ti6Al4V titanium alloy and AA2024 aluminum alloy sheets. The joints, welded with varying tool rotation and feed rate, were studied by analyzing the maximum shear strength, Vickers microhardness and optical observations. A dedicated numerical model, able to take into account the presence of the two different alloys, was used to highlight the effects of the process parameters on temperature distribution, strain distribution, and material flow. The combined analysis of experimental measurements and numerical predictions allowed explaining the effects of tool rotation and feed rate on the material flow. It was found that …
Effect of position and force tool control in friction stir welding of dissimilar aluminum-steel lap joints for automotive applications
2020
Widespread use of aluminum alloys for the fabrication of car body parts is conditional to the use of appropriate welding methods, especially if dissimilar welding must be performed with automotive steel grades. Friction stir welding (FSW) is considered to be a reasonable solution to obtain sound aluminum-steel joints. In this context, this work studies the effects of tool position and force control in dissimilar friction stir welding of AA6061 aluminum alloy on DC05 low carbon steel in lap joint configuration, also assessing proper welding parameter settings. Naked eye and scanning electron microscopy (SEM) have been used to detect macroscopic and microscopic defects in joints, as well as t…
Influence of Joint Geometry on Micro and Macro Mechanical Properties of Friction Stir Spot Welded Joints
2014
AbstractSpot welding can be considered a very common joining technique in automotive and transportation industries as it permits to obtain effective lap-joints with short process times and what is more it is easily developed through robots and automated systems. Recently, Friction Stir Spot Welding (FSSW) has been proposed as a natural evolution of the already known Friction Stir Welding (FSW) process, allowing to obtain sound spot joints that do not suffer from the insurgence of typical welding defects due to the melting of the base material. Similarly to FSW, both geometrical and technological parameters must be considered as they affect the material flow and the heat flux generated durin…
Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks
2013
Abstract The increasing use of innovative materials in manufacturing of modern mechanical components has led to the development of reliable joints between innovative (composite materials etc.) and traditional materials (steel, aluminum etc.). In the last few years, hybrid joints, combining the advantages of the adhesive joints and traditional mechanical joints as bolted or riveted joints, have been shown an increasing industrial interest especially in automotive and aerospace sectors. In the present paper a systematic experimental study of hybrid lap joints was carried out with the aim to detect the optimal joint configuration. Tensile tests on hybrid joints made by combining adhesive bondi…
On the mechanical behavior of BFRP to aluminum AA6086 mixed joints
2013
The aim of this work is to analyze the possibility to join aluminum alloy AA6086 and composite laminates reinforced with basalt fibers, an innovative material which use is growing in several applications as an alternative to glass fibers. To this goal, three joining techniques were investigated: mechanical by Self Piercing Riveting (in the next called SPR), adhesive by co-curing technique and mixed in which the joining techniques (i.e. adhesive and mechanical) were combined. Two manufacturing technologies (i.e. hand lay-up and vacuum bagging) were used both to produce composite substrates and to realize co-curing adhesion between the substrates to be joined. Mixed joints were realized by in…
Studio delle prestazioni di giunzioni incollate ibride (Strength evaluation of structural hybrid bonded joints)
2013
The idea of “hybrid joints” arises from the need of joining together materials, producing a tough, stiff and lightweight joint. The core concept is: use two different joining techniques, with the aim to increase the strength and gather the advantages of each technique, reducing the drawbacks. In this work hybrid joints consist in joints produced with two different kinds of joining techniques: one of them being adhesive bonding and the other being one among Resistance Spot Welding, Pop Riveting, Clinching, Self Piercing Riveting. The performance of hybrid joints are compared with those of traditional joints for the single lap joint geometry, for different geometric (plates thickness, pitch o…
Friction Stir Welding Lap Joint Resistance Optimization Through Gradient Techniques
2007
In recent years, scientific interest on friction stir welding (FSW) has grown more and more since such a joining technique allows one to weld lightweight alloys that are rather difficult to weld or even “unweldable” with the classic fusion welding operations. Furthermore, few industrial applications of the process are already known in different manufacturing fields. In this paper, the optimization problem of a FSW lap joint for automotive applications is investigated, taking into account process parameters such as the tool rotating speed and the tool feed rate; a numerical gradient technique is applied for the optimization procedure reducing the number of experimental tests to be developed.
Micro and macro mechanical characterization of friction stir welded Ti–6Al–4V lap joints through experiments and numerical simulation
2013
Abstract Lap joints of Ti–6Al–4V were produced and the effect of the main process parameters was studied through macro and micro investigations highlighting mechanical resistance, microhardness profiles, grain size and phase distributions. A dedicated numerical model was used to link the input process parameters to temperature and strain distributions and to the final microstructure in the welded joint. It is found that the strain produced in the stir zone by proper combination of process parameters plays a fundamental role in the final microstructure and mechanical properties of the joints.